X-CUBE X2
X-CUBE
With the TROX X-CUBE, an air handling unit with unlimited configuration options, TROX sets a new standard in the AHU market and defines considerably higher levels of quality, performance, flexibility, reliability, energy efficiency, and hygiene. Compelling all down the line. TROX now offers everything from a single source: air handling units and components – ideally complementary to each other.
For even more energy efficiency and better quality with less coordination effort.
Sales Austria and technical consulting
Phone +43 1 250 43-0
Fax +43 1 250 43-34
E-Mail trox@trox.at
X-CUBE compact
X-CUBE Ex
In certain locations or with certain conditions, even air can present a hazard. If flammable gases, mists or vapours, or combustible dusts mix under atmospheric conditions with air, an explosive atmosphere may result. In such a case it needs only a source of ignition, e.g a spark, friction, heat or electrostatic discharge, to cause an explosion, which in turn can result in loss of life, serious injuries and significant damage.
It is hence essential that equipment and systems intended for use in areas with potentially explosive atmospheres are designed and installed in such a way that the health and safety of people are not at risk.
Air handling units which are to be installed in areas with potentially explosive atmospheres, or which circulate potentially explosive air, have to meet special requirements; system owners, specialist consultants, HVAC contractors and manufacturers all have to ensure that these requirements are met.
The legally binding measures required to avoid hazards and to improve safety for people at risk from explosive atmospheres are stipulated in Directive 1999/92/EC (ATEX 137) for system owners and in Directive 2014/34/EU for manufacturers
X-CUBE X2 compact
X-CUBE CROFCU
X-CUBE X2 is a newly developed series from TROX, designed specifically to extend the X-CUBE range. The new generation is optimised for small to medium volume flow rates and offers tried-and-tested TROX system quality with sophisticated details.
No expert knowledge required:
Sound attenuators improve, obviously, the acoustics; but they can also help to reduce energy costs, as is proven by the new TROX downstream sound attenuator for the X-CUBE AHU.
It is placed just downstream of the fan and, due to the clever air distribution, creates a much lower pressure drop while at the same time reducing the sound power level.
The Ecodesign Directive prescribes that from 2018 onwards, air handling units must offer a heat recovery efficiency of more than 73%, and RAC systems more than 68%. A run around coil system from TROX with a TROX hydraulic unit including special RAC control guarantees highly efficient heat recovery of up to 80 %.
Furthermore: A special highlight is the reliable technical data by a certified design software.
The perfect overall system:
Suitable for all requirements:
Find out more in our brochure "X-CUBE Run around coil system for efficient heat recovery".
Hygiene and safety are complex challenges that only complete ventilation and air conditioning systems with intelligent control functions can meet.
X-CUBE control is THE intelligent solution. How? Look here!
Engineering. People. Quality. Three words that summarize the essence of our X-CUBE production in Anholt, Germany. Watch our video and discover it for yourself.
You can watch the production of the X-CUBEs - in unusual perspectives, aesthetic details and fast cuts.
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34
Contact
We are here for you
Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34
